High Quality Products Can Be Purchased.
You are here: Home » News » Loading and unloading of beer brewing equipment

Loading and unloading of beer brewing equipment

Views: 36     Author: Site Editor     Publish Time: 2022-10-17      Origin: Site

With the development with the craft beer, more and more people are looking for the microbrewery equipment and build their own brewery. Most of them are brewers or beer lovers, and have enough knowledge on how to use their brewery equipment to brew the craft beers, but maybe they don’t know well on how to load, unload their microbrewery equipment in the right way, especially for the situation that they purchase their brewing tanks from the abroad. So some damages or scratches may happen in the loading or unloading process.


Following we will talk about on how to load the brewery equipment in the containers and unload from them for the different situations, as well as some important attentions.


Ways to load your brewing equipment


(1)LCL (Less Container Load)

It refers to brewing equipment packed with small amount less than a full container. This kind of goods is usually taken by the carrier separately and centralized at the container freight station or inland station. Two or more tickets of goods are assembled into one container, and then the same goods are delivered separately at the container freight station or inland station at the destination.


  • Advantage and Disadvantage

The advantage is that we could save much shipping fee in this way. The disadvantage is that the shipping time is unstable. If the shipping company does not receive enough cargo for one container or any package, the shipping time will be delayed. In addition, in order to avoid the damages or scratches of the tanks in the long shipping, the tanks need to be packed by the plywood, which will lead to the increase in costs.


  • How to pack the brewing tanks

A thin film will be covered in the tank surface, the tanks could be supported by the U-steels with wheels at the bottom for moving conveniently, and then it will be loaded in the plywood case for the protection.


(2)20GP (20 Feet General Purpose)

It is the general container for the shipping, internal dimensions is 5950 x 2340 x 2370 mm. The inner space is very small compared with the general 40 feet containers, so it is often used for the microbrewery upgrading or expanding.


For the small fermenter tanks or bright beer tanks, such as 500L or smaller sizes, theycould stand in the 20GP containers with the ropes and feet bolts fixed, so we could save much space in the containers, and also save the shipping fee for the customers.


For the larger fermenter tanks or bright beer tanks, such as 10hL or bigger sizes, they could lie down in the 20GP containers with the U-steel supported, it’s very conveniently to move the tanks because of the bottom wheels assembled in the support frames.


(3)40GP (40 Feet General Purpose) & 40HQ (40 Feet High Cube)

They are the most general containers for the shipping of the brewing equipment, the internal dimensions of the 40GP is 11950 x 2340 x 2370 mm, 40HQ container is 11950 x 2340 x 2680mm. The inner space is very big compared with the general 20 feet containers, so it can be not only used for the microbrewery upgrading or expanding, but also for the turn key brewery built projects. And also, the 40HQ containers have a bigger internal space than the 40GP containers, but both have a very similar shipping cost, so the former (40HQ) is more popular in the shipping of the microbrewery equipment.


packing


Uninstall and reassemble beer equipment

It’s always a exciting thing when the customers receive their brewery tanks, the first thing should do is to check if all the brewing tanks in good condition without any damages or scratches, and then unload the brewery equipment from the containers and move them to the brewing site.


  • For the small brewery upgrading and expending projects

General speaking, there are only few small fermenters or bright beer tanks needed for the small brewery upgrading or expending projects. What should we do is to loosen the ropes and feet bolts that fixing the tanks, and then transfer the tanks from the containers to the brewing site by the forklift truck, it’s a very easy work!


  • For the small turn-key brewery built projects

Regarding the small turn key projects, such as 10hL or smaller size brewing system, the brewhouse could be loaded in the general 40HQ containers, so the customers could unload them from the containers directly without any adjustment or assembly before the using.


  • For the large turn-key brewery built projects

Regarding the large turn key projects, such as 15hL or bigger size brewing system, the brewhouse could not be loaded in the general 40HQ containers directly, the brewhouse system has to be disassembled and packed separately before the shipping, so the customers have to reassemble the brewhouse system when they receive the tanks. This is really a difficult work.


  • For the very large tanks contained by the special containers

For the large tanks shipped by the special containers, such as the crane machine will play an important role for the unloading tanks, it will handle the brewing equipment from the top of the containers by the ropes, and then deliver it by the the trucks.


Summary

Admittedly, the manufacture process of the brewing equipment is very important for the quality, but the loading, shipping and unloading also play the important roles in the whole turn-key projects process. Hope this could help you a lot!



PAY ATTENTION TO US
Facebook
Twitter
Google
LinkedIn
Instagram
DEGONG DTR
Brewery - Chemicals - Chocolate - Cosmetics - Pharmacy - Industry - Agriculture - Food - Dairy
  • Whatsapp
    Fax: +86 186 1518 5568
  • Email
    info@degonget.com
  • Phone
    Toll Free: +86 531 58780867