The brewhouse is designed to conduct the brewing process of mashing, lautering, boiling and whirlpooling. When the capacity exceeds 1000L, three vessel brewhouse is preferred by increasing brewmasters. Firstly, the mash tun, lauter tun, brew kettle and whirlpool tun can be combined variously according to different intention. Secondly, the brewmaster can brew 2 batches at the same time and the total capacity will be up to 3-4 batches per day, which means the three vessel brewhouse owns a bigger expanding capacity. These improvements guarantee the brewmaster make full use of the brewhouse equipment and bring comparable profits to the owner.
equipment thickness: | |
---|---|
Material: | |
capacity: | |
Heating source: | |
Quantity: | |
700L mash tun+700L lauter tun+700L boiling/whirlpool tun (with hot water tank)
700L mash/lauter tun+700L boiling tun+700L whirlpool tun (with hot water tank)
700L mash/boiling tun+700L lauter tun+700L whirlpool tun (with hot water tank)
3mm interior shell and 2mm exterior shell
Acid washing&passivating the Interior Finish to 0.2~0.4 μm
80mm polyurethane for insulation
Stainless steel manway
Agitator with VFD controlled motor and turbine reducer
3mm Interior Shell and 2mm exterior Shell
Acid washing&passivating the Interior Finish to 0.2~0.4 μm
80mm polyurethane for insulation
Stainless steel manway
CIP spraying ball and sparging ring
Side mounted grain outdoor with grain chute
Grain rake and scraper blade with VFD controlled motor& turbine reducer
False Bottom/Filter
3mm Interior Shell and 2mm exterior Shell
Acid washing&passivating the Interior Finish to 0.2~0.4 μm
80mm polyurethane for insulation
Stainless steel manway
Sanitary leveling sight glass
Steam vent with condensate ring for kettle stack
3mm Interior Shell and 2mm exterior Shell
Acid washing& passivating the Interior Finish to 0.2~0.4 μm
80mm polyurethane for insulation
Stainless steel manway
Anticlockwise Tangential whirlpool inlet in Northern Hemisphere
Clockwise tangential whirlpool inlet in Southern Hemisphere
Steam Heating: dimple plate jacket with inlet/outlet fittings for steam heat transfer;
Electrical Heating: use electric heaters to heat the medium in the jacket
Gas-fired Heating: use the gas burner at the bottom to heat tank directly
adding hops in boiling tun
If you are interested in beer equipment, get in touch with me freely.
Contact person: Kate
Email: michelle@degonget.com
Whatsapp: +86 178 6052 5597
Customer Reviews