|5HL Brewery Standard Configuration|
1.Malt Miller 300kgs stainless steel
2.5HL Mashing System 2 vessel
Mash/Lauter tank with mixer for heating blending. Installed rakers and false buttom for grains separation
Whirlpool tank with Tangential inlet
Wort Whirlpool-sanitary centrifugal mash pump
Heating: steam heating by electric/gas/oil boiler
Top domed manway door/glass manway door 400mm
PT100, connected to the controller for automatic temperature controlling
Wort pump:food grade sanitary and high efficiency wort pump
Wort cooling: Two stages or single stage Plate heat exchanger
360°spray ball cleaning with high efficiency
Heat exchanger, SS for inter and outernal
All necessary pipings, pipes and fittings
Number of FV: customize
Usage: fermentation, maturation and storage
Top domed with conical bottom
Material: SUS 304, inner thickness 3mm, outer thickness2.0mm, Insulation: PU80mm
Top manway/side manway 530*430mm
Cone bottom, 60 degree
Pressure gauge, Safety/vacuum valve
Cooling jackets on both cylinder and cone
Temperature sensor, PT100
SS legs and feet with adjustable bolts
Inside 360 rotating CIP ball
Working pressure: 0.15Mpa, Testing pressure: 0.3Mpa
Dry hops port
Rotating Racking arm
DEGONG 500L fermentation tanks
High cost performance.
Energy saving and emission reduction.
The polishing accuracy can reach Ra0.4μm.
The material with good wear resistance is copper beer equipment.
Strict tank pressure test.
Our equipment is made of SUS304. The inner sheath and sealing head of the tank are both 3.0mm. The outer sheath is 2.0mm. It guarantees good compression resistance and good abrasion resistance.
The special attention we give in the final quality inspection of each work is also a guarantee of unparalleled reliability and robustness. If you have any needs or questions, please contact us.