English  |
| Material: | |
|---|---|
| Heating source: | |
| Size: | |
| Electric element brand: | |
| Control panel: | |
| Quantity: | |
DGET-700L
DEGT
8438400000
Small craft brewery is more used for brewpubs or customers who wants to make smaller breweries.The size range from 100L to 1000L, or 1BBL to 10BBL, with flexible heating method, which includes electric, gas and steam heating. We design and produce a line of complete microbreweries to your specifications. To guarantee breweries'reliable performance, we use qualified stainless steel, fittings, and various parts, with our good craftsmanship, rich experience and technology in brewing industry. Especially, we focus on your convenient running procedures, by learning your special specifications and realizing them on the brewing systems.
What a complete 700L brewing system contains
Milling system | |||
1 | Grain Milling Unit | Rolling Miller | Double roller |
Beer brewhouse | |||
2.1 | 2-Vessel Brewhouse unit | Mash/Lauter tun | Grain rake with VFD |
Kettle/Whirlpool Tun | Steam Jacket on bottom and side/direct gas fired heating/electric heating | ||
Hot water tank | Steam Jacket heating/direct gas fired heating/electric heating | ||
Heat exchanger | SUS304 plate | ||
2.2 | Specifications | Material | SUS304/316 Or red copper |
Capacity | 700L | ||
Normal Configuration | Two Vessel: Mash/Lauter tank, Kettle Whirlpool tank | ||
Combined Three Vessel:Mash/Lauter/Whirlpool tank, Kettle | |||
Three Vessel if cutomer's demand | |||
Heat method | Electric,steam,direct fire heating | ||
Temperature sensor | PT100 | ||
Insulation | Polyurethane-thickness:100mm. | ||
Fermentation system | |||
3.1 | Fermentation system | Fermenter | Glycol cooling jacket on cone and bottom Temperature sensor |
Bright beer tank | Glycol cooling jacket on cone and bottom Temperature sensor | ||
3.2 | Technical parameter | Material | SUS304 316 |
Volume | 700L,1400L | ||
Thickness | Interior thickness: 3.0mm; | ||
Exterior 2.0mm; | |||
Welding | 100% TIG welding with pure argon gas shield | ||
Interior Finish | Overall polishing to 0.4-0.6 μm without dead corner | ||
Temperature sensor | PT100 | ||
Cooling media | Glycol water or alcohol water. | ||
Cooling jacket | Dimpled plate on cone and body | ||
Insulation | Polyurethane-thickness:100mm. | ||
Spraying ball | 360° coverage CIP Spraying ball | ||
Pressure Test | Stringent tank and Jacket leakage test by water and pressured gas | ||
Cooling system | |||
4 | Glycol Chilling Unit | Glycol Water Tank | Insulated conical top and sloped bottom |
Cold Water Tank | Dimple plate on side wall | ||
Chiller | |||
Control system | |||
5 | Control unit | Brewing and fermetation process Controlling | Manual button control panel or PLC control with touch screen for special |
CIP System | |||
6 | CIP | Caustic Tank | electric heating element inside |
Sterilization Tank | |||
Transfer&Control | |||
Manufacturing standard
Construction is from SUS 304 food grade stainless steel, all pipes are SUS304
All tanks to be supplied with Data Plates including Test Data & Serial Number
All tanks will be tested and inspected in the NDT room after construction & Quality Control Checks
Jackets will be tested using water pressure testing, testing pressure: 0.4Mpa (4 Bar) & working pressure:0.2Mpa (2Bar)
All tanks will be pressure tested for 48hours before leaving our factory;
Welds are full TIG welded by water spray method to ensure uniform weld pattern with full pickling & passivation
All tanks are mirror polishing inside, to be Ra 0.4um.
All Gaskets are manufactured with EPDM
Weather you want to brew craft beer or brew commercial beer,weather you want to start a new beer brewery project or expand your brewing scale.No matter what you want to brew lager or ale,stout beer or light beer,barley beer or wheat beer,fruit beer or corn beer,low concentration beer or high concentration beer.......DEGONG brewing equipment always can meet your requirement.
If you have interest,welcome to contact me freely
0 / 50 Comment