Our workers works with you on everything from defining your best brewery layout, to designing the setup and customize the size of your brewhouse and tanks. One of the most important thing is each of the brewhouse is built with Stainless Steel 304 and uses ABB motors, so they are as durable and hard-working as you can think. Further, every brewhouse goes through a comprehensive quality control inspection before delivery.
|fermentation tank manhole:|
Two-roller malt mill is designed for grinding of malt.It has a storage bin capacity of 16 liters, the ability to adjust the bite between the rollers.Rotation of the rollers carried out by belt gearing,driven by an electric motor.
It is designed for mashing and boiling of wort with hops.The device has heating steam jacket which covers the lower part of the device and its bottom.Mash Tun is thermally insulated with polyurethane foam.Temperature sensor located in the cylindrical part of the apparatus. Operating volume of the machine is 1000 liters. total - 1400 liters.
The unit is designed for separation of hot break.Filtration is carried out through removable sieve,consisting of several individual segments.It's also has a ripper, driven by an electric motor. The device is thermally insulated with urethane plastic foam.The apparatus has a rectangular hatch in the cylindrical part for unloading grains. Operating volume of the machine is 1000 liters, total - 1400 liters.
Cylindrical-conical tank is intended for fermentation and after-fermentation processes, and it also can be used as storage tanks for finished beer. It has a helical cooling system.The device is thermally insulated with urethane plastic foam.Cylindrical-conical tank has a hatch in the upper cap. Temperature sensor is located in the cylindrical part. At the top of the device is installed cleaning head (CIP).
Plate heat exchanger
It's double circuit plate heat exchanger. It is intended for cooling of wort before it pumping into CCT for fermentation.The cooling in the primary circuit is carried out with cold water and with the refrigerant in the second one.
It's intended for pumping of mash and wort between devices of brewing line (mash tun and lauter tun - whirlpool) at different stages of brewing process and pumping the finished cold hopping wort into CCT for fermentation.
hot water tank pump
Hot water tank pump made for a circulation of hot water and feeding in to brewing part.
If you are interested in 1000L beer equipment, please feel free to contact me.
Contact person: Kate
Call/Whatsapp: +86 178 6052 5597