English  |
| Quantity: | |
|---|---|
Vertical / Horizontal Brite Tanks
Configuration | |
Pressure | Design pressure 45 psi (3bar) |
Working pressure 30psi (2bar) | |
Interior shell | 304 stainless steel, thickness 4mm |
Exterior shell | Fully welded,304 stainless steel, thickness 2mm |
Interior and exterior finish | Acid washing to 0.6um |
Dish head and cone bottom | |
Carbonation stone and level | |
20% headspace, unless a different volume is requested | |
Top manway or side manway door | |
Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet | |
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom | |
Non welding CIP arm and rotating 360 degree reach spray ball | |
Solenoid relief valve, pressure relief valve (safe valve) are standard | |
Pressure gauge | |
Temperature sensor well | |
Sanitary sample valve and port | |
All clamps and gaskets to attach all accessories | |
Tank complete with piping, fittings, sanitary valves and all parts. | |
| 4 stainless steel legs with leveling footpads | |
| Details of Brite Tank |
| Contact us |
The special attention we give in the final quality inspection of each work is also a guarantee of unparalleled reliability and robustness. If you have any needs or questions, please contact us.
0 / 50 Comment