Ice Treated Water Tank 200 Liters in The Breworx Breweries

200L Cold water tank

Cold water tanks, or cold wine tanks as called in breweries, are buffer tanks filled with cold water used to cool the bitter wort to a fermentable temperature range after boiling. The cold water storage tank can be as simple as a single-skin container in a refrigerator, but it can also be a jacketed glycol tank with a cooling coil immersed in water or an insulated tank.

Parameter

• Diameter (with insulation layer) 700 mm

• Total height 1150 mm

• Weight 65 kg

• Total volume 350 L

• Usable volume 300 L

• Insulation layer 50 mm

Cold water tanks, or cold wine tanks as called in breweries, are buffer tanks filled with cold water used to cool the bitter wort to a fermentable temperature range after boiling. The cold water storage tank can be as simple as a single-skin container in a refrigerator, but it can also be a jacketed glycol tank with a cooling coil immersed in water or an insulated tank.

Cold liquid tanks are used in the brewing process and are also called buffer tanks. The buffer tank is filled with cold water to cool the bitter wort to a fermentable level after boiling. This process is completed by the wort cooler.

The cold liquid tank is connected to the glycol cooling tank and pressed into the water. The frequency level of beer cooling capacity helps to recommend the appropriate volume and cooling method. When water can pass through the heat exchanger, when it is running, the temperature of the hydrothermal tank is close to 70 to 80 degrees Celsius. This is a typical process that helps to brew continuously without interruption, without waiting for the actual temperature to rise.

Our cold water tank capacity ranges from 0.5BBL (HL) to 300BBL (HL), with an average headspace of 15%. All storage tanks are made of certified 304 stainless steel, with 100% TIG welded joints and seams, and have a sanitary internal polish. Dimple board jacket and high efficiency polyurethane foam insulation. All storage tanks are connected by Tri-clamp, and the glycol jacket is designed to be used up to 0.2MPa and tested at 0.6MPa. We can customize any tank to meet the space and height constraints of your brewery.

Accessories

-CIP spray ball ×1

-Temperature sensor ×1

-Drain pipe with butterfly valve×1

-CIP arm with butterfly valve ×1

-Four-leg adjustable foot pad × 4

-Washers, triangle clamps, accessories and all parts ×1

Contact us

We can customize product specifications according to your requirements. If you have any needs or questions, please contact us.