Available with either solid copper brewhouse vessels or polished stainless steel.Available with either electric or steam heating.
Brewhouse design with mash tun/lauter tun,brew kettle/whirlpool and auxiliary hot liquor tank.Skid-mounted brewhouse with pre-plumbed stainless steel hard piping for quick and easy installation.
|manhole for fermenter:|
|2500L brewery machinery beer brewing system introduction|
The following is a brief introduction to the equipment required for a brewing system. If you also need it, please contact me directly to get a quote and more information.
Brewing equipment for making craft beer
Two-roller malt mill is designed for grinding of malt.The ability to adjust the bite between the rollers.Rotation of the rollers carried out by belt gearing, driven by an electric motor.
It is designed for mashing and boiling of wort with hops. It has a mixing machine, driven by an electric motor. The device has heating steam jacket which covers the lower part of the device and its bottom. Mash Tun is thermally insulated with urethane plastic foam. Temperature sensor located in the cylindrical part of the apparatus. Operating volume of the machine is 2500 liters, total -3100 liters
It is intended for filtration of mash-separation of its solid (grains) and liquid (wort) phases. Also, this unit is designed for separation of hot break. Filtration is carried out through removable sieve, consisting of several individual segments. It's also has a ripper, driven by an electric motor. The device is thermally insulated with urethane plastic foam. The apparatus has a rectangular hatch in the cylindrical part for unloading grains. Operating volume of the machine is 2500 liters, total 3100 liters.
Mash/lauter tun,kettle/whirlpool tun and hot water tank
Electrical steam generator is intended to heat. mash tun with superheated steam. Productivity: up to 250 kg of steam/h
It's intended for pumping of mash and wort between devices of brewing line (mash tun and lauter tun-whirlpool) at different stages of brewing process and pumping the finished cold hopping wort into CCT for fermentation.
Cooling pump N1 is intended.for circulation of refrigerant coolant solution from the collecting tank for cooling in the refrigeration aggregate.Cooling pump N2 is intended for supplying CCT and heat exchanger with refrigerant coolant from the collecting tank.
Plate heat exchanger
It's double circuit plate heat exchanger. It is intended for cooling of wort before it pumping into CCT for fermentation. The cooling in the primary circuit is carried out with cold water and with the refrigerant in the second one.
Cylindrical-conical tank (CCT)
Cylindrical-conical tank (CCT) is intended for fermentation and after-fermentation processes, and it also can be used as storage tanks for finished beer.Refrigerant -40% propylene glycol. The device is thermally insulated with polyurethane. Cylindrical-conical tank has a hatch in the upper cap.Temperature sensor is located in the cylindrical part.Machine with pressure gauge is situated on the co2 nozzle. At the top of the device is installed cleaning head (CIP). The working volume of the unit is 5000l, total -6000l
Craft fermenting vessels double size of brewhouse
(cylindrical-conical tank) Control panel (cylindricalconical tank) is intended for automatic temperature control in CCT with the help of controllers that are located on the front panel. The framework of control panel is made of stainless steel.
Cooling unit is intended for cooling of refrigerant solution, which cools is in turn the second circuit of heat exchanger and cylindricalconical tank. Freon is a compressor-condensing unit mounted on the frame. It has all the necessary protection and automation systems: flow relay, pressure relay and crankcase heater.
It is intended for CIP-washer for cylindrical-conical tank. Power consumption: 380v, 50 Hz.
Device is designed for washing kegs of 30 and 50 liters.Volume each.each has an automatic maintaining of desired temperature(heating by TH), pump, control panel,which are mounted on support frame.
|Name of equipment amount||Amount|
|Hot water tank||1|
|Pipe line and isolation valve of brew house||1set|
|Control panel for brewhouse||1|
|Plate heat exchanger||1|
|Control panel for fermenting system||1|
|Cooling unit for fermentation tanks||1|
|Automation cooling system(solenoid-operated valve,temperature sensor)||1|
|Contact Alice today|
In our excellent collection of brewing equipment, we offer our clients premium quality Microbrewery Equipment. This brewery equipment is well-manufactured by the use of premium quality components, basic material and sophisticated technology.