English  |
| Quantity: | |
|---|---|
DEGONG-1''
DEGONG
| Specification |
| Connection sizeinfo | 1 inch |
| Voltageinfo | 24 V DC |
| Materialinfo | Stainless steel |
| Seal materialinfo | NBR (nitrile rubber) |
| Functioninfo | Normally closed |
| Operationinfo | Indirect |
| Recommended for | Air Alcohols Combustible gases Lubricant Oil Sea water Water (up to 60°C) |
| Max pressure (bar)info | 16 |
| Connection type | Inner thread cylindrical BSPP-G |
| Features | Anti-waterhammer Energy efficient (under 9 VA) Low noise |
| Min temperature (°C) | -10 |
| Max temperature (°C) | 80 |
| Valve bore (mm) | 25 |
| Kv value (m3/h)info | 30 |
| Degree of protection (IP) | IP65 |
| nnectioninfo | DIN-A |
| Material qualityinfo | Stainless steel 316 (1.4408) |
| Min pressure difference (bar)info | 0.2 |
| Model | Straight |
| Coil typeinfo | AC10 |
| Max. ambient temp. (°C) | 55 |
| Nominal power (VA) | 8 |
| Duty cycle | 100% |
| Peak power (VA)info | 9.5 |
| Main feature |
1. External leakage is blocked, internal leakage is easy to control, safe to use
2. The system is simple, it can be connected to the computer, and the price is low
3. Express action, small power, light appearance
4. The adjustment accuracy is limited, and the applicable medium is limited
5. Diverse models and wide applications
| Working principle |
There is a closed cavity in the solenoid valve with through holes at different positions. Each hole is connected to a different oil pipe. In the middle of the cavity is a piston. There are two electromagnets on both sides. Which side of the magnet coil will be attracted to the valve body when it is energized. On the other hand, by controlling the movement of the valve body to open or close the different oil discharge holes, and the oil inlet is normally open, the hydraulic oil will enter the different oil discharge pipes, and then the piston of the cylinder is pushed by the oil pressure. Drive the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.
| Contact us |
We can customize product specifications according to your requirements. If you have any needs or questions, please contact us.
0 / 50 Comment