CO2 Laser Engraving And Cutting Machine Spare Parts Chiller Industrial Chiller CW3000 CW5000 CW5200

CW3000 Water Chillers

Application

Products are mainly used in high-power laser industry, water-cooled high-speed spindle precision optical machinery, experimental instruments and other professional fields. They are widely used in clothing, footwear, advertising, printing, marking, molds, glasses, chemicals, toys and many other industries.

Features

• Water coolers are divided into pyrolysis coolers and cooling coolers to meet the needs of different industries.

• Using high-performance components, high reliability, low energy consumption and high environmental protection.

• The design is reasonable, which can meet the long-term use in the high-polluting environment.

• It has a complete alarm function and can be used for real-time monitoring of the status.

• Small size, light weight, convenient installation, use and maintenance. Water coolers are divided into pyrolysis coolers and cooling coolers to meet the needs of different industries.

Products Show

Installation steps

• Open the package and check whether the machine is in good condition and whether all necessary accessories are complete.

• Open the mouth screw on the top of the machine and add cooling water (please do not power on the machine without water).

• According to the system conditions, connect the inlet and outlet pipes.

• Connect the power cord and turn on the power switch (note: do not let water overflow).

• Check the water level of the radiator again (keep the distance between the water level and the mouth 80-150mm).

Precautions

• Coolers that have not been used for a long time or are in transit must be drained of cooling water continuously.

• It is strictly forbidden to block the running cooler without water supply.

• The cooler should be placed in a well-ventilated, dry environment and away from heat sources.

• Keep a distance of at least 30cm between the air outlet at the rear of the cooler and the obstacle, and keep a distance of at least 10cm between the obstacle and the air inlet on both sides.

• In order to protect the laser tube, the cooling fan of the cooler will stop working when the water temperature is low (about 10°C), and will restart when the water temperature rises (about 20°C).

• In order to ensure a good heat dissipation effect, please open the cover to clean up the dirt after long-term use. For working in cold northern areas, it is best to use non-corrosive ones.