Keg washing/filling machines produced by DEGONG performed with 1 or 2 washing heads. The machine is specially designed for washing and sterilizing various beer fresh-keeping containers, such as stainless steel barrels, plastic beer barrels and fresh beer barrels. It can automatically accomplish all of the procedures of washing, sterilizing and CO2 pressure preparing, heated by steam or electric heating elements.
Each step of working procedure is controlled with programmable Siemens controller at worksite with time sequence.
This machine is easily installed and operated, can be used in both factories and brew pubs.
Dimension of machine (l*w*h): 1200x1450x1800 mm
Maximum piston travel of cylinder: 300 mm
Net weight: 220 kg
Capability: 80-100 barrels/hour (20L barrels)
Air consumption: 8-22.5 m3/h
Water consumption: 1-3 m3/h
Washing way: Upside down
Demanded size of barrel: Diameter: 250 - 500 mm
Height: 360 - 560mm
Air source pressure: 0.6-0.8mpa
Co2 pressure: 0.2-0.3mpa
Voltage: Ac 220v 50hz single phase (for steam heated machine)
Filling Station: Fix The Keg--Filling--Stop--Take The Keg
Washing Station: Impact The Keg ---Drain Residue--Water Rinse--Caustic Rinse--Hot Water Rinse--Steam Sterilization -- Co₂ Pressurization -- Take The Keg