Hot/cold Liquor Tanks 10BBL 20BBL 30BBL Beer Brewing System customized brewhouse

Hot Liquor Tank

Electric, steam designs available.

Heavily insulated and clad.

Electric design equipped with 9KW, 12KW or 16KW+heater, analog or digital temperature control and thermocouple.

Steam design equipped with engineered multi-zone steam jacket.

CIP arm with removable rotating spray ball.

Sight level designed into CIP arm/main drain.

Circulation jet to address stratification.

Safety overflow drain.

Sturdy stainless steel legs with bracing and adjustable leveling pads.

Thermo-well port positioned to client specification.

All certified 304 stainless steel.

CLT stainless steel

CLT's are needed in the distillery to provide stable temperature water to the dephlegmator(s) and to cool the mash mixer if you have one. It can also be used for cooling water in the condenser. Ours use dimple jacket technology and connect to the glycol system. They include process piping and a recirculation / transfer pump. Sold in 10bbl、20bbl and 30bbl sizes, with custom sizes available up to 100bbl.

Fabrication starts with a build print and raw material handling. It ends with polishing and cleaning stainless to a shine.

Most of the tanks we build have several layers in the wall of the vessel. The shell is the inside layer of metal that has contact with product. This is usually the thickest layer to handle pressure or vacuum and support the weight of the tank. Attached to the outside of the shell is a perforated dimple jacket for circulating a temperature control media. That media is usually steam, water, glycol, or oil, depending if the tank needs to be heated, cooled, or maintain a specific temperature. We even use a mixture of refrigeration gasses in coils for cryogenic cooling. The next layer is insulation which can be mineral wool, ceramic insulation, board foam, or injected foam depending on the application. Finally the vessel is covered with a skin, or cladding, which is a thinner metal used to protect the insulation, keep moisture out, and give the tank it’s characteristic look.

Cold Liquor Tank

Engineered glycol jacket, heavily insulated and clad.

CIP arm with removable rotating spray ball.

Sight level designed into CIP arm/main drain.

Circulation jet.

Sturdy stainless steel legs with bracing and adjustable leveling pads.

Thermo-well port positioned to client specification.

All certified 304 stainless steel.

Glycol jacket cold liquor tank

Cold Liquor Tanks Includes:

Glycol Jacket, Insulated and Clad

Recirculation / Transfer Pump

Process Piping and Valves

CIP System

Cold Water Tank

The most common in large or neutral craft breweries are cold water tanks and cold liquid tanks, which are another good choice for wort cooling during beer brewing. These tanks can store cold water in advance to cool down the wort faster after the boiling process. Industrial chillers can quickly add cold water to the cold water tank.