1000L 2000L 3000L Copper Distilling Equipment with Bubble Cap Plates Gin Vodka Whisky Distillery

3000L Distilling Equipment

• Pot Materials: Stainless steel 304, Copper, or Stainless steel 304 and copper combined

• Different types of gin basket

• Bubble Cap Plates Column, Column can be stainless steel, copper or glass

• Column Diameter: 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20” or customized according to your requests

• Each Plate has a sight glass window, drain valve

• Copper or Stainless Steel Dephlegmator

• Bypass piping and 3-way valves

• Agitator with long heavy blades for mash cooking

• Italy brand gear box, NEMA standard for North American Market

• Explosion proof motor, can be CE, UL, CSA approved

• Low pressure steam jacketed heating or oil (water) bath electric heating system

• Large glass manway

• Variety of customized copper whisky head

• Large size Tube and Shell Condenser, stainless steel or copper

• Pressure Relief Valve and pressure gauge for inner boiler and jacket

• PU insulation

• Tri Clamp Butterfly Valve on the drain

• CIP in the pot, whisky head, columns, dephlegmator and condenser

• Stainless steel or copper parrot

• Bolt to the Floor Stainless Table Stand or Stainless Column Stand for the Condenser, You Pick.

• Mirror Polish Inside

• Swirl pattern outside, satin finish outside or mirror polish

• CIP pump and CIP manifold is optional

• Copper spirits safe is optional

• Coil type condenser is optional

• Spirits storage tank is optional

• Triclamp or DIN connection is optional

DEGONG 3000L Distilling Equipment

Structure:with jacket layer and insulation;

Top of pot with manway,inlet,safety valve,thermometer,pressure gauge and liquid return back hole.top with agitator can be used to distill any wash,even washes full of fruit pulp or grain mash can heated in this configuration of boiler without any risk of burning on bottom of pot.Also,by constantly agitating the wash throughout the distillation run,the distillery can save 20% on the heating required to perform the distillation.

It is technically an expansion chamber,and it is usually a nearly spherical dome that sits directly on top of the boiler,it passes through a comparatively narrow passage way into the larger volumn of helmet.This results in a sudden reduction in pressure,which helps hold back higher~boiling compounds while allowing desirable aromatics and flavors to continue up the column.this is the key to producing a truly excellent spirits.

The vapor from the helmet rises into the column,in some still configurations, the column is mounted directly on top of the helmet.when there is no helmet,the column is mounted directly on top of boiler. In some other configurations,such as two column,the column is positioned beside the boiler, the reason is the still would stand too high for most facilities if the column were stached on top of the helmet,or even on top of the boiler. within the column are bubble cap trays, the vapor rises up the tube inder the bubble caps and bubbles out from under the cap and through the standing liquid on each tray. The standing liquid overflows at a certain depth to the next tray beblow.

The special attention we give in the final quality inspection of each work is also a guarantee of unparalleled reliability and robustness. If you have any needs or questions, please contact us.